Best Deck Bench with Storage Ideas

Wooden Deck Storage Bench

Modern Bedroom Bench and Table

Few Ideas for Modern Storage Bench

April 3, 2019 storage bench

Ideas Outdoor Corner Storage Bench

Build an outdoor corner storage bench to match your wooden patio furniture with a few simple instructions. Teak, cedar, redwood or treated wood work best for outdoor storage and other furniture, as these forests are more resistant to mold and insects and age well outdoors. You can never have enough storage capacity, so put out the screwdriver and build a simple outdoor storage bench. Have your boards cut to size at your local wood store and you can unit this project together in no time.

Amazing Ideas Storage Bench

Amazing Ideas Storage Bench

Mount the front, back and top of your outdoor storage bench by joining 3 sets of 3 4-foot long cedar planks 2 by 6. Place the side 3 planks side by side horizontally and place 1 of the strips of treated wood through them vertically, 6 inches from each end. Attach the strips to the cedar planks by the first drill holes where you will place the wood screws. Insert 3 screws into the wooden strip, one for each board.

12 Inspiration Gallery from Ideas Outdoor Corner Storage Bench

Image of: White Ideas Storage Bench
Image of: Storage Bench Outdoor Ideas
Image of: Small Ideas Storage Bench
Image of: Pool Ideas Storage Bench
Image of: Patio Storage Bench Ideas
Image of: Large Storage Bench Corner Ideas
Image of: Garden Ideas Storage Bench
Image of: DIY Ideas Storage Bench
Image of: Corner Storage Bench Ideas
Image of: Best Storage Bench
Image of: Awesome Ideas Storage Bench
Image of: Amazing Ideas Storage Bench
 
Related :  Upholstered Storage Bench Ideas

Assemble the 2 sides of your storage bench by joining 2 groups of 3 2 feet long planks of cedar 2 by Place horizontally and attach a strip of treated wood in the center, vertically. Drill pilot holes for the screws and insert a screw in each plank. Attach the sides of the front and back of the bench with L-brackets, 2 at each corner. Place the brackets, mark the points for the screws, drill pilot holes and then insert the screws.

Comments are closed.